Order Number : 5000924 Mike
Vessel       :  Lagoon 450S

Deposit
Recv'd
Measurements
Complete
Layouts
Requested
Layouts
Posted
Waiting for
Approval
Layouts
Approved
Order in
Production
Order
Completed
Customer
Advised
Order
Shipped
XXXXX









 

Special Shipping Instructions : None

Sail as Quoted to Customer:

Lagoon 450S

Performance Mainsail
3 Reefs
5 Full Battens Pockets
Draft Stripe, Telltails, Triple Stitched
Sailbag
Aluminum Headboard, Leech line, Cam Cleat
Radial Patches Head, Clew and Tack
Sail Slides or slugs included
P: 17.65m E: 6.63m
Sail Area : 78.98m2

9oz Contender Pro Radian - Tri Radial + 2 ply


130% Performance Genoa Furling
Weathermax or Sunbrella U\V Protection and Foam Luff
Luff Tape for Furler
Telltails, Draft Stripe
Radial Patches Head, Clew and Tack
Leech Line and Foot line with Cam Cleats
Triple Stitch, Sail Bag
I: 16.84m J: 4.7m
Sail Area : 51.44m2

9oz Contender Pro Radian - Tri Radial + 2ply



   

  

How to Use This Web Based Order Form

                

Customer Information

=== CUSTOMER BILLING INFORMATION ===

Transaction ID: 9G657616CN448891R
cmichael.sharon@gmail.com


Phone :
E-Mail : cmichael.sharon@gmail.com


mikeparagliding@gmail.com
==== CUSTOMER SHIPPING INFORMATION ===

TBD
First Name        : 
Last Name :
Address :
City :
State/Province :
Zip/Postal Code :
Country :


Quote Number       :3161181163.TXT
ID                 :5132590521.TXT



Sail Specifications





ZSPARS batten car system with 32 mm track.

Headboard Car: A=234 mm, B=47 mm, C=100 mm, D=105 mm (distance from back of track to centre of bottom pin.

Batten Car: A=140 mm, B=60 mm, C=80 mm, D=115 mm,  F= 12mm

Intermediate Car: A=140 mm, B=40 mm, D=35 mm,

12m thread for batten holders.

The batten holders go inside the batten pockets. The batten pockets run continuously from luff to leech. In the coming days I will send you the precise length of each batten.




Hi Michael,

My batten boxes are made by Incidences Sails. The boxes are 150 mm long, 60 mm wide and 30 mm high. The hole for the battens has a diameter of 20 mm. There are 4 screws on each side. The spacing between each screw is 35 mm.

My battens are round fibreglass. The batten diameter is 15 mm. I have attached several photographs. Please advise if you have any questions.

Best regards,

Michael