Enclosed is photograph of head old mainsail.  Unfortunately the
drawings did not transmit very well but here are the dimensions.

		Clew measurement  from the edge of the sail to the middle of
the ring is 6/8" and the measurement from the top of the rope on the foot to
the center of the ring is 11/16 "

		Tack measured from the top edge of the rope of the luff to
the center of the ring is 5/8" and the foot of the sail from the top of the
rope to the center of the ring is 11/16"

		The head of sail measurement from the luff (top of the rope)
to the center of the hole is 15/16", from the top of the sail the
measurement is 1/2" to the center of the ring.

		The old sail has slugs that measure 7/8" in length and 5/16
wide, photo attached. The slugs are only on the luff of the sail, the foot
has no slugs and the rope slides in the boom track, the
diameter of the rope is 3/8"

		I made a mistake in changing the measurement of the foot to
7 ft. 9 in.  The foot of the sail should be 7 ft 8 in.

		Would like the draft stripe to be blue.

		I noticed on your list of items you described the foot of
the sail as "loose footed",  I want the foot of the sail to be secured in
the track of the boom, not loose.  The old sail did not have 
		Slugs on the foot, it was fed into the track using the rope
edge.  Should I have slugs in the foot?  Also would like to have slugs on
the luff of the sail.

	Michael, hope this answers all your questions, if not please let me
know if you have any more questions.

Regards,
Charlie Palmer